Welcome to VEZMARA — Safety Products. Trusted Supply..
Polypropylene Snap Hook Safety Lanyard. Polypropylene webbing material with snap hook connector. Approx. 1.8 m length. Load rating ~15-25 kN. Lightweight and chemical/moisture resistant. For restraint, positioning, or safety at height. Price mentioned per piece.
Out of stock
Available sizes
Available colors
A durable lanyard made from polypropylene (PP) webbing, fitted with a snap hook connector on at least one end. Designed for fall protection, restraint, or positioning use in work at height, maintenance, and industrial applications. Lightweight, chemical resistant, and economical alternative for lighter duty tasks where shock absorption may or may not be required. Key Features: Material & Construction — Polypropylene (PP) webbing — lightweight, water-resistant, quick dry, with heat sealed or stitched edges to prevent fraying; Hook / Connector — One snap hook (locking or non-locking) made from alloy steel or similar; optionally second snap hook on the other end if double leg or restraint type; Standard Lengths — Common lengths: ~ 1.8 meters (or 5-6 feet) depending on use / job site requirement; Strength Rating — Depending on width of webbing & hardware, typical break load ~ 15-25 kN (depending on design & certification); Use Mode / Application — Fall restraint / positioning / work safety; may or may not include an energy absorber (if required for fall arrest); Certification / Standards — Might comply with EN 355 or EN 358 or ANSI / OSHA standards for lanyards depending on region & whether designed for fall arrest vs restraint. Industrial Uses / Applications: Maintenance and repair work at height; Roof access and inspection; Utility / telecom tower work; Light industrial environments where full shock absorbing fall arrest isn't required; Situations involving exposure to moisture, chemicals, or where PP's non-absorbent / quick drying properties help.
Safety Information
Safety lanyard for restraint, positioning, or fall protection. Must be used with a full body harness and a suitable anchor point. Inspect before each use for damage. Replace if damaged, worn, or after a fall. Store in a cool, dry place.
No certifications listed.
Toho ML 209 Shock Absorbing 1.8 Meter Double Lanyard With Anti-Fall Hook. 100% polyester webbing, 45 mm width, 25 kN strength. 1 zinc carabiner + 2 forged scaffold hooks. Energy absorber limits braking force to ≤6 kN. Conforms to EN 355:2002. Price mentioned per piece.
Toho ML-207 Shock Absorbing 1.8 Meter Fall Arrest Single Lanyard with Anti-Fall Hook. Polyester webbing lanyard with built-in energy absorber. 1.8 meter length. One screwgate karabiner and one anti-fall scaffold hook. Lightweight and durable. Price mentioned per piece.
Honeywell Titan 1013431 2 Meter Shock Absorbing Safety Double Lanyard. 2 m energy-absorbing forked polyamide lanyard, breaking strength 15 kN. 18 mm galvanized steel screwgate karabiner (22 kN) + 2 x 63 mm light alloy scaffolding snap hooks (22 kN). EN 355:2002 and EN 362:2004 certified. Price mentioned per piece.
Double Polyamide Safety Lanyard with Scaffold Hooks. 1.8 m double leg PA rope lanyard. Spring type scaffold hook on one side. Option for harness connection on other end. Reliable for fall protection and restraint at height. Price mentioned per piece.
